GULF FABRICS, INC.
ULTRALEATHER™ PEARLIZED
Ultraleather® | Pearlized, an extension of our signature Ultraleather® | Original adds a little sparkle to the mix. Pearlized highlights the classic natural grain with a subtle luminescence that provides a hint of luxury and refinement. The sensorial experience is further elevated by its sophisticated silken touch. The color palette is chic yet transitional, sure to make a distinctive design statement.
.
PLEASE NOTE: THESE COLORS MAY APPEAR DIFFERENT ON YOUR SCREEN
|
|
|
|
||||
|
|
|
|
||||
|
|
|
|
|
General Specifications Composition:100% Polyurethane Surface 100% Reinforced Rayon Backing Weight: Approx. 9.7 oz. Per Square Yard Approx. 330 Grams Per Square Metre Thickness: Approx. 1.0 Millimetres Width:54 Inches / 137 Centimetres Performance Abrasion:ASTM D4157 / 400,000 Double Rubs (Wyzenbeek) *BS 2543 / 180,000 Rubs (Martindale)* *meets or exceeds Hydrolysis :14+ Weeks ASTM D3690-02 SECT. 6.11 (Hydrolytic Stability) ISO 1419 Method C (Accelerated Ageing) Adhesion of Coating: ASTM D751 Tear Strength: ASTM D2261 Breaking Strength: ASTM D5034 Colorfastness Light Fastness:AATCC 16.3, 200 Hours, Grade 4-5 Crocking:AATCC 8, Class 5 Wet & Dry |
Flammability F/R Rating: • ASTM E84 (Adhered) - Class A • CA TB 117-2013 - Pass • FMVSS 302 & 95/28 Annex IV - Pass • NFPA 260 - Class 1 • UFAC - Class 1 Other Tests*: • ASTM E84 (Unadhered) • BS 5852 PT 0, 1 & 5 (Crib 5) • BS 5867 Part 2 Type B • BS 7175• California Technical Bulletin 133 • FAR Specifications • IMO A.652 (16) • NFPA 701*These fabrics, when treated and/or used with other compatible furniture components, have been shown to perform well under these fire test conditions. Earth Friendly • GREENGUARD Certified • Meets stringent VOC emission standards • Promotes healthier indoor air quality • Contributes to LEED™ and BIFMA level® credits • Compliant with Prop 65 • No Conflict Minerals • No Flame Retardants (ex. Halogenated, Brominated) • No PBDEs (Polybrominated Diphenyl Ethers) • No Plasticizers, Heavy Metals, Stabilizers, Phthalates or Bisphenol A (BPA) • No POPs (Persistent Organic Pollutants) • No PVC (Polyvinyl Chloride)• No toxic by-products • Over 99% of solvents recaptured and recycled |
Care & Cleaning for Uf Brand Products
This information is not a guarantee and does not relieve the user from the responsibility of the proper and safe use of the product and all cleaning agents. The use of certain agents can be harmful to the surface appearance and lifespan of the product if not used properly. Ultrafabrics assumes no responsibility resulting from improper use of the cleaning agents.
Instructions
|
General Cleaning Instructions* One of the best ways to keep Ultrafabrics, LLC brand surfaces looking great is to properly maintain them by cleaning regularly to prevent excessive dirt from accumulating. Below is a general outline to help you keep your quality Ultrafabrics brand products looking their best. Following these guidelines will help to extend the life of the fabric: Clean regularly with soap and water Wipe up spills as soon as they occur Alcohol based cleaners such as Fantastik® and Formula 409® Sanitize using disinfectants such as bleach (20%) water solution, hydrogen peroxide based, or quaternary based.* For stubborn stains, wipe the stain off with isopropyl (rubbing alcohol) as soon as possible Thoroughly rinse all solution residue with clean water Air dry
**For tough stains clean using isopropyl/rubbing alcohol. After cleaning, rinse surface with clean water and wipe dry. Prompt attention is important for successful removal of any stain. Guide refers to performance tests conducted in laboratory conditions. While the foregoing instructions have proven to work in many cases, especially in which ink stains are addressed immediately, not all ink stains can be removed. This information does not guarantee the user from the responsibility of the correct and safe use of product and referenced cleaning agents. Product may not protect against intentional stains or permanent inks. PLEASE NOTE: A variety of clothing and accessories may contain dyes that could transfer to lighter colors, depending upon variations in temperature and humidity. Dye transfer is difficult to control, not always fully preventable, and may be irreversible. Ultrafabrics, LLC assumes no responsibility and can not be held liable for dye transfer caused by external contaminants.
|