GULF FABRICS, INC.

LUXURIOUS BREATHABLE SIMULATED LEATHER ENGINEERED FOR SOLAR ENDURANCE

BRISA® Indoor/Outdoor is the first breathable polyurethane fabric to exceed rigorous standards for light fastness, surpassing the ACFFA standard by nearly three times. In simple terms, BRISA® Indoor/Outdoor was formulated to resist fading and spotting over extended periods of direct sunlight. Virtually flawless under 1,000 hours of solar exposure, this beautiful fabric is also resistant to mold and mildew. Soft and luxurious, this product retains suppleness over time with an anti-mildew agent and a unique ventilation system that allows it to breathe. On a hot summer afternoon, BRISA® Indoor/Outdoor offers the coolest seat under the sun. Providing comfort to the highest degree.

 

NOTE: ACTUAL COLORS MAY VARY FROM YOUR COLORS ON YOUR SCREEN

BRS 5750 POLAR

BRS 5852 JASPER

BRS 5267 DAISY

BRS 3160 DURANGO

BRS 3823 AZTEC

BRS 5867 NIMBUS

BRS 4529 GLASS

BRS 4435 CRICKET

BRS 8214 MARIGOLD

BRS 1331 BURNT RED

BRS 5749 BLACK ONYX

BRS 2542 MICHIGAN BLUE

BRS 4528 SEA GREEN

 
BRS 5259 SUNFLOWER PHASE OUT

BRS 1313 BRICK WALK PHASE OUT

SPECIFICATIONS

Composition:
100% Polyurethane Surface 65% Polyester, 35% Rayon Backing
Weight:
Approx. 11.2 oz per square yard (Approx.380 grams per square metre Approx. 17 oz per linear yard (Approx. 520 grams per linear metre)
Thickness:
Approx. 1.1 millimetres
Width:
54 inches / 137 centimetres
Putup:
Approx. 50 yd / 45 metres R.O.T.
Abrasion:
ASTM D 4157 - 200,000 Double Rubs (Wyzenbeek)
BS 2543 - 180,000 Rubs (Martindale)
Air Permeability:
NA
Antimicrobial:
NA
Dimensional Change:
ASTM D 3597
Hydrolysis:
ASTM D 3690-02 SECT. 6.11 (Hydrolytic Stability) ISO 1419 Method (Accelerated Ageing)
Seam Strength:
ASTM D 751
Stretch and Set:
SAE J855

 

Tear Strength:
ASTM D 5733

Tensile Strength:

ASTM D 5034
Crocking:
AATCC 8, CLASS 5 Wet & Dry
Light:
AATCC 16E, AATCC 16A, CLASS 5 ISO 105 - BO2: 1999 Grade 7/8
Gas:
AATCC 23, CLASS 5
Ozone:
AATCC 109, CLASS 5
Flammability:
ASTM E 84 (adhered)--Class A
CA 117 E--CLASS 1
CA TB 117 E- 2013--Pass
FMVSS 302 & 95/28 ANNEX IV--PASS
NFPA 260--CLASS 1
UFAC--CLASS 1
Sea (Salt) Water:
AATCC 106, CLASS 5
BS EN IS0-E02,GRADE 4-5
Chlorinated Water:
AATCC 162, CLASS 5
BS EN IS0-E03,GRADE 4-5
Perspiration:
AATCC 15, CLASS 5
BS EN IS0-E04,GRADE 4-5

 

Indoor/Outdoor Maintenance Instructions*

General Cleaning Instructions*

One of the best ways to keep Ultrafabrics, LLC brand surfaces looking great is to properly maintain them by cleaning regularly to prevent excessive dirt from accumulating. Below is a general outline to help you keep your quality Ultrafabrics brand products looking their best.

Following these guidelines will help to extend the life of the fabric:

 
  • Clean regularly with soap and water
  • Wipe up spills as soon as they occur
  • Alcohol based cleaners such as Fantastik® and Formula 409®
  • Sanitize using disinfectants such as bleach (20%) water solution, hydrogen peroxide 
    based, or quaternary based.*
  • For stubborn stains, wipe the stain off with isopropyl (rubbing alcohol)
    as soon as possible
  • Thoroughly rinse all solution residue with clean water
  • Air dry
  • All Ultrafabrics Indoor/Outdoor products should be stored in a dry, well ventilated area

  • Ultrafabrics mildew resistant surfaces do not promote mildew growth, however, mildew may grow on dirt and other foreign substances that are not removed from the fabric
  • The frequency of cleaning will vary greatly depending upon the local outdoor environment in which the product is used
  • Cushions should not remain wet or be covered, as this will increase the chances of mildew growth occurring
All of our High UV products perform best when:
1. Paired with an open cell, reticulated, quick drying foam and/or a waterproof, anti-mildew barrier between the fabric and foam
2. Utilizing air vents and/or a mesh, open weave fabric bottom

Note: These recommendations allow for proper draining and quick drying.

 

Contact Information

Telephone:
813-875-2707
FAX:
813-348-2700
Postal address:
3709 N. Armenia Ave. Tampa, FL 33607-1303
PO Box 7725, Tampa, FL 33673-7725
 
Electronic mail:
General Information: www.gulffabrics.com
email:   Gulffab1@aol.com