GULF FABRICS INC

COVE

Speaking directly to the senses, Ultratech™ | Cove brings to life a beautifully micro-beaded texture highlighted by an impressively bold palette. Uniting meticulous artisanship and ground-breaking technology in ingenious symbiosis, Cove delivers a uniquely refined matte finish and richly saturated colors beyond traditional polyurethane varieties. The futuristic tactile appeal and visually pleasing aesthetic will deliver fresh styling to any setting.

Features include:
• Enduring performance (14+ weeks hydrolysis results)
• Ultimate softness for an unparalleled seating experience, created by our innovative
engineering process
• Optimal stain protection and ease of care

ULC 3302 MALT

ULC 5971 SLEET

ULC 5972 MARLIN

ULC 3304 GRIZZLY

ULC 2599 MARINE

ULC 4423 EMERALD

ULC 9313 LYCHEE

ULC 7210 GUAVA BERRY

ULC 1327 CHERRY RED

ULC 2619 CAPITAL BLUE

General Specifiations
Composition:
100% Polyurethane Surface
65% Polyester, 35% Rayon Backing
Weight:
Approx. 10.3 oz. Per Square Yard
Approx. 350 Grams Per Square Metre
Thickness:
Approx. 1.0 Millimetres
Width:
54 Inches / 137 Centimetres
Performance
Abrasion:
ASTM D4157 / 200,000 Double Rubs (Wyzenbeek)*
BS 2543 / 200,000 Rubs (Martindale)*
*meets or exceeds
Hydrolysis:
14+ Weeks
ASTM D3690-02 SECT. 6.11 (Hydrolytic Stability)
ISO 1419 Method C (Accelerated Ageing)
Adhesion of Coating:
ASTM D751
Tear Strength:
ASTM D2261
Breaking Strength:
ASTM D5034
Colorfastness
Light Fastness:
AATCC 16.3, 200 Hours, Grade 4-5
Crocking:
AATCC 8, Class 5 Wet & Dry

Flammability
F/R Rating:
• ASTM E84 (Adhered) - Class A
• CA TB 117-2013 - Pass
• FMVSS 302 & 95/28 Annex IV - Pass
• NFPA 260 - Class 1
• UFAC - Class 1
Other Tests*:
• ASTM E84 (Unadhered)
• BS 5852 PT 0, 1 & 5 (Crib 5)
• BS 5867 Part 2 Type B
• BS 7175
• California Technical Bulletin 133
• FAR Specifiations
• IMO A.652 (16)
• NFPA 701

*These fabrics, when treated and/or
used with other compatible furniture
components, have been shown to perform
well under these fie test conditions.

Earth Friendly
• GREENGUARD Certifided
• Meets stringent VOC emission standards
• Promotes healthier indoor air quality
• Contributes to LEED™ and BIFMA level ® credits
• Compliant with Prop 65
• No Conflct Minerals
• No Flame Retardants (ex. Halogenated, Brominated)
• No PBDEs (Polybrominated Diphenyl Ethers)
• No Plasticizers, Heavy Metals, Stabilizers, Phthalates
or Bisphenol A (BPA)
• No POPs (Persistent Organic Pollutants)
• No PVC (Polyvinyl Chloride)
• No toxic by-products
• Over 99% of solvents recaptured and recycled

General Cleaning Instructions for Ultrafabrics® Products*
One of the best ways to keep all Ultrafabrics, LLC brand surfaces looking great is to properly maintain them by cleaning regularly to prevent excessive dirt from accumulating.

Below is a general outline to help you keep your quality Ultrafabrics brand products looking their best.

Following these guidelines will help to extend the life of the fabric:

• Clean regularly with soap and water

• Wipe up spills as soon as they occur

• Alcohol based cleaners such as Fantastik® and Formula 409

• Sanitize using disinfectants such as bleach (20%) water solution, hydrogen peroxide based, or quaternary based

• For stubborn stains, wipe the stain off with isopropyl (rubbing alcohol) as soon as possible

• Thoroughly rinse all solution residue with clean water

• Air dry.

*For tough stains clean using isopropyl/rubbing alcohol. After cleaning, rinse surface with clean
water and wipe dry. Prompt attention is important for successful removal of any stain.

Guide refers to performance tests conducted in laboratory conditions. While the foregoing instructions have proven to work in
many cases, especially in which ink stains are addressed immediately, not all ink stains can be removed. This information does not
guarantee the user from the responsibility of the correct and safe use of product and referenced cleaning agents. Product may not
protect against intentional stains or permanent inks.

*PLEASE NOTE: A variety of clothing and accessories may contain dyes that could transfer to lighter colors, depending upon variations in temperature
and humidity. Dye transfer is difficult to control, not always fully preventable, and may be irreversible. Ultrafabrics, LLC assumes no responsibility and
can not be held liable for dye transfer caused by external contaminants.

Contact Information

Telephone:: 813-875-2707
FAX:: 813-348-2700
Postal address:: 3709 N. Armenia Ave. Tampa, FL 33607-1303; PO Box 7725, Tampa, FL 33673-7725

Electronic mail:: General Information: www.gulffabrics.com; email: Gulffab1@aol.com