GULF FABRICS INC
ECO TECH
Ultratech™
| Eco Tech makes a striking statement. Featuring a unique matte finish unlike
any other polyurethane, Eco Tech’s innovative and exotic shagreen texture was
created utilizing proprietary, design-centric Ultrafabrics® engineering. A
sophisticated color palette adds to the allure and results in a collection of
future-focused, sensorial fabrics.
| Due to variations in monitor settings and color balances, colors shown are a representation only of the actual fabric color and should not be construed as an actual color match of the product listed. |
|
|
|
|
||||
|
|
|
|
||||
|
|
|
General Specifiations Composition: 100% Polyurethane Surface 82% Rayon, 18% Polyester Weight: Approx. 9.7 oz. Per Square Yard Approx. 330 Grams Per Square Metre Thickness: Approx. 1.0 Millimetres Width: 54 Inches / 137 Centimetres
|
Earth Friendly • GREENGUARD Certified • Meets stringent VOC emission standards • Promotes healthier indoor air quality • Contributes to LEED™ and BIFMA level ® credits • Compliant with Prop 65 • No Conflct Minerals • No Flame Retardants (ex. Halogenated, Brominated) • No PBDEs (Polybrominated Diphenyl Ethers) • No Plasticizers, Heavy Metals, Stabilizers, Phthalates or Bisphenol A (BPA) • No POPs (Persistent Organic Pollutants) • No PVC (Polyvinyl Chloride) • No toxic by-products • Over 99% of solvents recaptured and recycled
Flammability
|
| Care & Cleaning for Uf Brand Products
This information is not a guarantee and does not relieve the user from the responsibility of the proper and safe use of the product and all cleaning agents. The use of certain agents can be harmful to the surface appearance and lifespan of the product if not used properly. Ultrafabrics assumes no responsibility resulting from improper use of the cleaning agents .General Cleaning Instructions* One of the best ways to keep Ultrafabrics, LLC brand surfaces looking great is to properly maintain them by cleaning regularly to prevent excessive dirt from accumulating. Below is a general outline to help you keep your quality Ultrafabrics brand products looking their best. Following these guidelines will help to extend the life of the fabric: Clean regularly with soap and water Wipe up spills as soon as they occur Alcohol based cleaners such as Fantastik® and Formula 409® Sanitize using disinfectants such as bleach (20%) water solution, hydrogen peroxide based, or quaternary based.* For stubborn stains, wipe the stain off with isopropyl (rubbing alcohol) as soon as possible Thoroughly rinse all solution residue with clean water Air dry **For tough stains clean using isopropyl/rubbing alcohol. After cleaning, rinse surface with clean water and wipe dry. Prompt attention is important for successful removal of any stain. Guide refers to performance tests conducted in laboratory conditions. While the foregoing instructions have proven to work in many cases, especially in which ink stains are addressed immediately, not all ink stains can be removed. This information does not guarantee the user from the responsibility of the correct and safe use of product and referenced cleaning agents. Product may not protect against intentional stains or permanent inks. PLEASE NOTE: A variety of clothing and accessories may contain dyes that could transfer to lighter colors, depending upon variations in temperature and humidity. Dye transfer is difficult to control, not always fully preventable, and may be irreversible. Ultrafabrics, LLC assumes no responsibility and can not be held liable for dye transfer caused by external contaminants. |
813-875-2707
813-348-2700
3709 N. Armenia Ave. Tampa, FL 33607-1303
PO Box 7725, Tampa, FL 33673-7725
General Information: www.gulffabrics.com
email: Gulffab1@aol.com