GULF FABRICS INC
BRISA DISTRESSED
Brisaฎ | Distressed, a functional performance fabric, highlights a relaxed rustic appeal complemented by an authentic palette of earthy hues. Enhanced with a unique ventilation system synonymous with the Brisaฎ family, Distressed delivers incredible softness for an unrivaled experience of sensorial comfort. Additionally, unique acoustical qualities provide noise reduction capabilities in vertical panel applications, providing a stylized option for busy settings.
![]()
|
![]()
|
![]()
|
![]()
|
![]()
|
|||||
![]()
|
![]()
|
![]()
|
![]()
|
![]()
|
|||||
![]()
|
![]()
|
![]()
|
![]()
|
![]()
|
|||||
![]()
|
![]()
|
![]()
|
![]()
|
![]()
|
|||||
![]()
|
![]()
|
![]()
|
![]()
|
![]()
|
General Specifiations Composition: 100% Polyurethane Surface 65% Polyester, 35% Rayon Backing Weight: Approx. 9.3 oz. Per Square Yard Approx. 315 Grams Per Square Metre Thickness: Approx. 1.0 Millimetres Width: 54 Inches / 137 Centimetres
|
Flammability F/R Rating: ASTM E84 (Adhered) - Class A CA TB 117-2013 - Pass FMVSS 302 & 95/28 Annex IV - Pass NFPA 260 - Class 1 UFAC - Class 1
Earth Friendly
BIFMA |
Care & Cleaning for Uf Brand Products
This information is not a guarantee and does not relieve the user from the responsibility of the proper and safe use of the product and all cleaning agents. The use of certain agents can be harmful to the surface appearance and lifespan of the product if not used properly. Ultrafabrics assumes no responsibility resulting from improper use of the cleaning agents
.General Cleaning Instructions*
One of the best ways to keep Ultrafabrics, LLC brand surfaces looking great is to properly maintain them by cleaning regularly to prevent excessive dirt from accumulating. Below is a general outline to help you keep your quality Ultrafabrics brand products looking their best. Following these guidelines will help to extend the life of the fabric:
Clean regularly with soap and water
Wipe up spills as soon as they occur
Alcohol based cleaners such as Fantastikฎ and Formula 409ฎ
Sanitize using disinfectants such as bleach (20%) water solution, hydrogen peroxide based, or quaternary based.*
For stubborn stains, wipe the stain off with isopropyl (rubbing alcohol) as soon as possible
Thoroughly rinse all solution residue with clean water
Air dry
Contract & High Traffic Areas | Ballpoint Pen Ink** |
**For tough stains clean using isopropyl/rubbing alcohol. After cleaning, rinse surface with clean water and wipe dry. Prompt attention is important for successful removal of any stain. Guide refers to performance tests conducted in laboratory conditions. While the foregoing instructions have proven to work in many cases, especially in which ink stains are addressed immediately, not all ink stains can be removed. This information does not guarantee the user from the responsibility of the correct and safe use of product and referenced cleaning agents. Product may not protect against intentional stains or permanent inks.
PLEASE NOTE: A variety of clothing and accessories may contain dyes that could transfer to lighter colors, depending upon variations in temperature and humidity. Dye transfer is difficult to control, not always fully preventable, and may be irreversible. Ultrafabrics, LLC assumes no responsibility and can not be held liable for dye transfer caused by external contaminants.
813-875-2707
813-348-2700
3709 N. Armenia Ave. Tampa, FL 33607-1303
PO Box 7725, Tampa, FL 33673-7725
General Information: www.gulffabrics.com
email: Gulffab1@aol.com