Revolutionary. Breathable. Soft.

General Specifications

Composition:                                                                                       Surface 100% Polyurethane 65% Polyester, 35% Rayon Backing

Weight:

Approx. 12 oz. Per Square Yard

Approx. 410 Grams Per Square Metre 

Thickness:

Approx. 1.1 Millimetres

Width:

54 Inches / 137 Centimetres 

Performance:

Abrasion:

 ASTM D4157 / 400,000 Double Rubs (Wyzenbeek)

*BS 2543 / 180,000 Rubs (Martindale)*                                           *meets or exceed sb

Hydrolysis:

14+ WeeksASTM D3690-02 SECT. 6.11

 (Hydrolytic Stability)

 ISO 1419 Method C (Accelerated Ageing)

Adhesion of Coating

ASTM D751

Tear Strength:

ASTM D2261

Breaking Strength:

ASTM D5034

Antimicrobial:

ASTM E2180

Colorfastness:

Light Fastness

AATCC 16.3, 200 Hours, Grade 4-5

Flammability 

F/R Rating:

* ASTM E84 (Adhered) -Class A

• CA TB 117-2013 - Pass

• FMVSS 302 & 95/28 Annex IV - Pass

• NFPA 260 - Class A

• UFAC - Class 1 

Other Tests*:

• ASTM E84 (Unadhered)

• BS 5852 PT 0, 1 & 5 (Crib 5)

• BS 5867 Part 2 Type B

• BS 7175                                                                                          • California Technical Bulletin 133

• FAR Specifications

• IMO A.652 (16)

• NFPA 701*These fabrics, when treated and/or used with other compatible furniture components, have been shown to perform well under these fire test conditions

.

Earth Friendly

• GREENGUARD Certified

• Meets stringent VOC emission standards

• Promotes healthier indoor air quality

• Contributes to LEED™ and BIFMA level® credits

• Compliant with Prop 65

• Less than 100 ppm of antimicrobial treatment

• No Conflict Minerals

• No Flame Retardants (ex. Halogenated, Brominated)

• No PBDEs (Polybrominated Diphenyl Ethers)

• No Plasticizers, Heavy Metals, Stabilizers, Phthalates or       Bisphenol A (BPA)

• No POPs (Persistent Organic Pollutants)

• No PVC (Polyvinyl Chloride)

• No toxic by-products

• Over 99% of solvents recaptured and recycled

General Cleaning Instructions*
One of the best ways to keep Ultrafabrics, LLC brand surfaces looking great is to properly maintain them by cleaning regularly to prevent excessive dirt from accumulating. Below is a general outline to help you keep your quality Ultrafabrics brand products looking their best.
Following these guidelines will help to extend the life of the fabric:

 Clean regularly with soap and water Wipe up spills as soon as they occur

 Alcohol based cleaners such as Fantastik® and Formula 409®

 Sanitize using disinfectants such as bleach (20%) water solution, hydrogen peroxide based, or quaternary based.*

 For stubborn stains, wipe the stain off with isopropyl (rubbing alcohol) as soon as possible

 Thoroughly rinse all solution residue with clean water

 Air dry

**For tough stains clean using isopropyl/rubbing alcohol. After cleaning, rinse surface with clean water and wipe dry. Prompt attention is important for successful removal of any stain.
Guide refers to performance tests conducted in laboratory conditions. While the foregoing instructions have proven to work in many cases, especially in which ink stains are addressed immediately, not all ink stains can be removed. This information does not guarantee the user from the responsibility of the correct and safe use of product and referenced cleaning agents. Product may not protect against intentional stains or permanent inks.
PLEASE NOTE: A variety of clothing and accessories may contain dyes that could transfer to lighter colors, depending upon variations in temperature and humidity. Dye transfer is difficult to control, not always fully preventable, and may be irreversible. Ultrafabrics, LLC assumes no responsibility and can not be held liable for dye transfer caused by external contaminants.